Cascade Crew

BluFbdy

so luke has brought it to my attention that I need a v8 tpi memcal because the ecm were using has a v6 and wont run the car if it ever goes into limp mode so I need a 7730 memcal and I need it fast, 305 ,350 doesnt matter just one lol did a seatch for an aujp and the price was thru the roof!

Were gonna burn a prom for it so as long as its for 8 cylinders im happy[/code]

Al Hasse · Posted: Fri May 20, 2011 8:57 pm Post subject:

I have an internet shortcut on my Tuner Pro CD from Moates which has a large selection of bins.

http://www.moates.net/fileman/index.php?dir=1%29%20Stock%20Binaries/DIY-EFI%20GMECM%20Binaries

Requires a user name and password which I'll PM

Open 1227730 727 01 A1 3E 46 51 55 6B 88 8D 96 D8, then open 8D, AUJP is in the 8D folder.

BluFbdy · Posted: Fri May 20, 2011 9:25 pm Post subject:

Wait can we use the v6 memcal? Or am I still on the hunt?

Al Hasse · Posted: Fri May 20, 2011 9:32 pm Post subject:

I think I misread your post. Your looking for the chip aside from the PROM, correct? Best chance might be at the yard, most of those cars still have the ECM.

BluFbdy · Posted: Fri May 20, 2011 9:45 pm Post subject:

I need the whole memcal

BluFbdy · Posted: Fri May 20, 2011 9:51 pm Post subject:

Plus I couldnt find a Z around here to save my butt lol

91camaro_rs · Posted: Sat May 21, 2011 7:42 am Post subject:

i have 2 V6 memcals and i was told that you cant use a v6 memcal and put a v8 350 prom on it because of the limp home mode is different,

so he is just looking for a 305 TPI speed density memcal, mine is AXXB or AXXF IIRC

RSFreak · Posted: Sat May 21, 2011 11:16 am Post subject:

I got a couple '730s sitting around but they are all V6s. I was gonna do the swap that Travis had done when he was autocrossing his V6 and never got around to it. Sad

BluFbdy · Posted: Sat May 21, 2011 7:48 pm Post subject:

??? meaning? is it possible to use a v6 memcal? ive seen "modded" ones but im kinda sketch on that

Al Hasse · Posted: Sat May 21, 2011 7:57 pm Post subject:

If you get the chance, make a trip to the Yank-a-Part in Poulsbo, from where you are, it's not too far. Go up Bond road toward Kingston, make a left at the light for Stottlemeyer Rd, then first left up a dirt drive, there's a sign at the drive. They have a decent selection of 3rd-gens and maybe one will have an intact ECM which you can pull the memcal.

Twilightoptics · Posted: Sun May 22, 2011 8:13 am Post subject:

A V6 memcal wont work in limp home mode very well. It's set for different sized injectors, 6 cyl spark, etc.

BluFbdy · Posted: Sun May 22, 2011 10:43 am Post subject:

Yeahh I figured.... Damn. The 305 will work tho right?

91camaro_rs · Posted: Sun May 22, 2011 10:07 pm Post subject:

yeah it will, considering i have a 305 memcal, and i have used limp home mode lol

BluFbdy · Posted: Sun May 22, 2011 10:21 pm Post subject: