| View previous topic :: View next topic |
| Author |
Message |
TurdGen1989
Member
Joined: 30 Aug 2009
Posts: 472
Location: Roseburg,OR
|
 Posted: Wed Mar 10, 2010 5:25 pm Post subject: |
 |
|
are you willing to part with the center caps off the maroon one? and the lug nuts also?
_________________
Phil.
GMC High Sierra
 |
|
| Back to top |
|
 |
flea
Member
Joined: 25 Jul 2008
Posts: 1246
Location: Raymond WA
1991 Chevrolet Camaro RS
|
| Posted: Wed Mar 10, 2010 9:52 pm Post subject: |
|
|
anyone give me an honest answer as to the PITA level of swapping the rear seats from the split rear to solid? If its as easy as a straight swap then I would be interested in the rear seats pictured, mine are something close to being completely FUBAR and since Im tearing out the interior for new carpet anyway, well, might as well consider new 25 year old seats.
_________________
Killing mailboxes since 2009 |
|
| Back to top |
|
|
kurfbird
Member
Joined: 02 Mar 2005
Posts: 866
Location: Whidbey Island
|
| Posted: Wed Mar 10, 2010 9:57 pm Post subject: seat swap |
|
|
Pretty easy. You will ahve to add the slit seat bracket to your floor. I drilled out the welds then rivited back to the floor in the proper location. Or you can weld it in place
This was one of my first conversions. pretty easy
_________________
kurfbird
1991 Camaro 3.1 v6
1991 Firebird 3.1 v6
1992 Formula 350 5.7
700r4 Transmissions
brucesthirdgenparts.com |
|
| Back to top |
|
|
IROC-stangs
Member
Joined: 06 Jan 2010
Posts: 374
1987 Chevrolet Camaro IROC-Z
|
| Posted: Wed Mar 10, 2010 9:59 pm Post subject: |
|
|
| evermind about the hatch or the hood/wheels the hatch wont work on my friends camaro. sorry. i wouldnt mind the floormats but i dont wanna have you go out of your way just to bring those down. |
|
| Back to top |
|
|
flea
Member
Joined: 25 Jul 2008
Posts: 1246
Location: Raymond WA
1991 Chevrolet Camaro RS
|
| Posted: Wed Mar 10, 2010 10:34 pm Post subject: Re: seat swap |
|
|
| kurfbird wrote: | Pretty easy. You will ahve to add the slit seat bracket to your floor. I drilled out the welds then rivited back to the floor in the proper location. Or you can weld it in place
This was one of my first conversions. pretty easy |
It sounds like you are describing converting from solid to split, I currently have split seats the picture looks like a solid, I might be mistaken about that though. So do I need to add the brackets, or will I need to remove them. I dont care one way or the other if the seats are solid or split, I just want good, clean unstained seats if they can be switched easily. Sounds like they can be.
_________________
Killing mailboxes since 2009 |
|
| Back to top |
|
|
kurfbird
Member
Joined: 02 Mar 2005
Posts: 866
Location: Whidbey Island
|
| Posted: Wed Mar 10, 2010 10:42 pm Post subject: Re: seat swap |
|
|
| flea wrote: | | kurfbird wrote: | Pretty easy. You will ahve to add the slit seat bracket to your floor. I drilled out the welds then rivited back to the floor in the proper location. Or you can weld it in place
This was one of my first conversions. pretty easy |
It sounds like you are describing converting from solid to split, I currently have split seats the picture looks like a solid, I might be mistaken about that though. So do I need to add the brackets, or will I need to remove them. I dont care one way or the other if the seats are solid or split, I just want good, clean unstained seats if they can be switched easily. Sounds like they can be. |
Sorry I read it the wrong way. Tired.
Yes its pretty easy to just drill out the welds and removed the bracket.
_________________
kurfbird
1991 Camaro 3.1 v6
1991 Firebird 3.1 v6
1992 Formula 350 5.7
700r4 Transmissions
brucesthirdgenparts.com |
|
| Back to top |
|
|
iansane
Member
Joined: 16 Jan 2004
Posts: 5742
Location: Bothell
1991 Pontiac Trans Am
|
| Posted: Wed Mar 10, 2010 10:48 pm Post subject: |
|
|
Do you even need to remove the bracket? I have a horrible memory but I seem to recall my room mate used to have an 85 TA that we put 4thgen solid back rear seats when his originally came with split. Just bolted each side down? Worth a shot...
_________________
| Quote: | | Sometimes I actually think I'm slightly retarded in the mouth. |
|
|
| Back to top |
|
|
91camaro_rs
Member
Joined: 03 Dec 2008
Posts: 1712
Location: Fox Island, Wa
1991 Chevrolet Camaro RS
|
| Posted: Wed Mar 10, 2010 11:09 pm Post subject: |
|
|
| IROC-stangs wrote: | | 91camaro_rs wrote: | @IROC-stangs someone called me about the hood, if he doesnt buy it you can have it for $100, its in great shape. the z28 wheels on the maroon car im looking to get $150 they come with good tires. and hatch id say $50 or so, floor mats $5, i will not ship this stuff cause its all so darn huge, but i will deliver, idk where in oregon you are, but if you pay me gas ill bring the stuff down
@Greg, seats under seat covers have the normal tears, not in the best shape ill get pics today
@Al, car has no motor..... so cant really remove sensors from engine block, unless thats what all that wiring and stuff in the engine bay is
gettin more pics today |
the hood or wheels arent something that i need i just though they would be nice to fix up expecialy the hood to repaint but i dont have the money right now. i'll talk to my friend that needs the hatch and see if he wants it and i'll probaly take the floor mats if my friend wants the hatch so you dont have to come all the way down here.? are there rear mats? and what condition is the hatch and the mats? thanks. i'm in tigard. |
i have a set of actual camaro floor mats that are in perfect condition, if you just want the mats i can ship them to you....
and yes i do have the horn button for the steering wheel,
i took a ton of the black interior out of the maroon car today, most of it i will use in my car so that means i will have a lot of red interior stuff for sale soon
and switching from split to solid rear seats is pretty easy, just a bolt on each side i believe, so i would assume you would have to remove the split seat bracket
and i want to sell the lugs and center caps along with the rims
_________________
'91 Camaro RS 5.7 TPI- 700r4- 3.27 posi- headers- chambered exhaust- |
|
| Back to top |
|
|
91camaro_rs
Member
Joined: 03 Dec 2008
Posts: 1712
Location: Fox Island, Wa
1991 Chevrolet Camaro RS
|
| Posted: Wed Mar 10, 2010 11:12 pm Post subject: |
|
|
@Dan Johnson the dash pad in the blue car is perfect, i looked at it today, no cracks or anything, they are going for about $160 on ebay..idk if thats high or not but i would sell it for $100 its in really good shape
_________________
'91 Camaro RS 5.7 TPI- 700r4- 3.27 posi- headers- chambered exhaust- |
|
| Back to top |
|
|
GREG DAVIDSON
Member
Joined: 15 Mar 2008
Posts: 1159
Location: Salem
1989 Pontiac Formula
|
| Posted: Wed Mar 10, 2010 11:21 pm Post subject: |
|
|
| let me know what you have left of the black int when you get done, i mainly want seats but i may have found a set closer to home i'll let you know |
|
| Back to top |
|
|
91camaro_rs
Member
Joined: 03 Dec 2008
Posts: 1712
Location: Fox Island, Wa
1991 Chevrolet Camaro RS
|
| Posted: Wed Mar 10, 2010 11:28 pm Post subject: |
|
|
the seats that you see in the pics, passenger side and rear are in good shape, rear are pretty clean, and driver side has tears, im pretty sure im using the black seats in the blue car, and that means my red seats will be for sale
_________________
'91 Camaro RS 5.7 TPI- 700r4- 3.27 posi- headers- chambered exhaust- |
|
| Back to top |
|
|
GREG DAVIDSON
Member
Joined: 15 Mar 2008
Posts: 1159
Location: Salem
1989 Pontiac Formula
|
| Posted: Wed Mar 10, 2010 11:38 pm Post subject: |
|
|
ok nevermind then  |
|
| Back to top |
|
|
91camaro_rs
Member
Joined: 03 Dec 2008
Posts: 1712
Location: Fox Island, Wa
1991 Chevrolet Camaro RS
|
| Posted: Wed Mar 10, 2010 11:56 pm Post subject: |
|
|
ok, so after i completely strip the cars this weekend, im going to go through all the parts, each and everyone and write down what it is so i have a list of everything that way its easier to see what i have, and so i know what i have 
_________________
'91 Camaro RS 5.7 TPI- 700r4- 3.27 posi- headers- chambered exhaust- |
|
| Back to top |
|
|
flea
Member
Joined: 25 Jul 2008
Posts: 1246
Location: Raymond WA
1991 Chevrolet Camaro RS
|
| Posted: Thu Mar 11, 2010 6:38 am Post subject: |
|
|
Let me know what you want for the back seats, I might have to take those off your hands.
_________________
Killing mailboxes since 2009 |
|
| Back to top |
|
|
91camaro_rs
Member
Joined: 03 Dec 2008
Posts: 1712
Location: Fox Island, Wa
1991 Chevrolet Camaro RS
|
| Posted: Thu Mar 11, 2010 12:41 pm Post subject: |
|
|
how does $60 sound for the seats?
_________________
'91 Camaro RS 5.7 TPI- 700r4- 3.27 posi- headers- chambered exhaust- |
|
| Back to top |
|
|
chevysquid
Member
Joined: 28 Dec 2007
Posts: 72
Location: Coupeville, Washington
|
| Posted: Thu Mar 11, 2010 2:00 pm Post subject: |
|
|
Would you be interested in trading your perfect dash pad for my double adjustable panhard bar? Or the springs, either one.
_________________
1986 IROC Z-28 |
|
| Back to top |
|
|
91camaro_rs
Member
Joined: 03 Dec 2008
Posts: 1712
Location: Fox Island, Wa
1991 Chevrolet Camaro RS
|
| Posted: Thu Mar 11, 2010 4:29 pm Post subject: |
|
|
i might be interested in trading for the panhard bar, but i do still need money for TPI system, fuel pump and some other things, but if i make enough off the other stuff then i will be interested in trading
_________________
'91 Camaro RS 5.7 TPI- 700r4- 3.27 posi- headers- chambered exhaust- |
|
| Back to top |
|
|
IROC-stangs
Member
Joined: 06 Jan 2010
Posts: 374
1987 Chevrolet Camaro IROC-Z
|
| Posted: Thu Mar 11, 2010 4:52 pm Post subject: |
|
|
| 91camaro_rs wrote: | | IROC-stangs wrote: | | 91camaro_rs wrote: | @IROC-stangs someone called me about the hood, if he doesnt buy it you can have it for $100, its in great shape. the z28 wheels on the maroon car im looking to get $150 they come with good tires. and hatch id say $50 or so, floor mats $5, i will not ship this stuff cause its all so darn huge, but i will deliver, idk where in oregon you are, but if you pay me gas ill bring the stuff down
@Greg, seats under seat covers have the normal tears, not in the best shape ill get pics today
@Al, car has no motor..... so cant really remove sensors from engine block, unless thats what all that wiring and stuff in the engine bay is
gettin more pics today |
the hood or wheels arent something that i need i just though they would be nice to fix up expecialy the hood to repaint but i dont have the money right now. i'll talk to my friend that needs the hatch and see if he wants it and i'll probaly take the floor mats if my friend wants the hatch so you dont have to come all the way down here.? are there rear mats? and what condition is the hatch and the mats? thanks. i'm in tigard. |
i have a set of actual camaro floor mats that are in perfect condition, if you just want the mats i can ship them to you....
and yes i do have the horn button for the steering wheel,
i took a ton of the black interior out of the maroon car today, most of it i will use in my car so that means i will have a lot of red interior stuff for sale soon
and switching from split to solid rear seats is pretty easy, just a bolt on each side i believe, so i would assume you would have to remove the split seat bracket
and i want to sell the lugs and center caps along with the rims |
what do the mats look like if you dont mind me asking and how much do you want? also im not sure how to send money never done it. |
|
| Back to top |
|
|
chevysquid
Member
Joined: 28 Dec 2007
Posts: 72
Location: Coupeville, Washington
|
| Posted: Thu Mar 11, 2010 5:24 pm Post subject: |
|
|
| 91camaro_rs wrote: | | i might be interested in trading for the panhard bar, but i do still need money for TPI system, fuel pump and some other things, but if i make enough off the other stuff then i will be interested in trading |
cool, let me know.
_________________
1986 IROC Z-28 |
|
| Back to top |
|
|
Darbbackwords
New Member
Joined: 12 Mar 2010
Posts: 19
Location: Seattle/Whidbey
|
| Posted: Fri Mar 12, 2010 12:17 am Post subject: |
|
|
If the floor mats are still there when I get the mirror, I will take them. (the rubber Chevy ones pictured right?) I may also be willing to do some delivery of parts for people in Seattle/Whidbey area, but I don't plan on doing more then one run.
On another note, I saw the early black door panels and might be interested. (haven't ever seen them in person and don't know what you want for them.) |
|
| Back to top |
|
|
|
Garage
FAQ
Search
Usergroups
Register
Profile
Log in to check your private messages
Log in
