Cascade Crew

[dlp]

Looking for a dash pad for my wifes 1990 IROC convertible. Must be in good to great shape. The previous owner ran self tapping screws with snap washers into the pad for a custom made interior cover. Anyone have a decent dash pad laying around?

[Al Hasse]

I've got one. It has a little damage on the corners at the door opening, but I've epoxied over it and it's mostly unnoticeable. I can bring it over tomorrow after work.

This is the driver side which has the worst of the damage. It's actually a little more noticeable than the photo shows.

[83Z28BlackBetty]

I also have one. It is in the same shape as Al's. It has one crack on one side. I'll give it to ya for 20 bucks.

its what it cost me at pull a part

~JAKE

[dlp]

Sorry guys, forgot about this post. I am looking to replace the dash pad in my wifes conevrtible with something that looks new. The previous owner installed 3 snap connectors with screws into the pad for a lame tonou like cover. The pad is in great shape except for three friggin holes and indentations from the male part of the snap connector.

I wonder if GM still sells pads? I bought one for my 87 10 years ago, IIRC it cost around 280.00.

[flea]

I found two but they be spendy

http://www.ecklerscamaro.com/product.asp?pf_id=746109&dept_id=1656

http://www.classicindustries.com/controller.cfm?type=product&action=productDetail&categoryId=72&subCategoryId=571&catalogYearId=24&startRow=1&sortBy=1&sortOrder=1&resultsPerPage=50&currentPage=1&choosenAttributeIdList=&choosenAttributeValueIdList=&productId=65137&productSearchCatalogId=1

[dlp]

Thank you for the links. \
I would probably purchase one if they were OEM parts. That is close to what I paid for the pad in my 87, but that was a GM part from a dealer.