Cascade Crew

budgetracer · Member Joined: 05 Mar 2006 Posts: 40 Location: Salem

I've finally decided I'm going to scrap my project. Soon after I bought it I started getting into motorcycles and the car just doesn't mean as much anymore. I have pics of all of it, I just have to get a cord for my camera to upload.

355 with vortec heads, rebuilt, Crane 274h cam, edelbrock performer rpm intake, edelbrock 600 electric choke, Hei disturbiter, other accesories included too, ready to drop in complete! $1200

1983 Trans Am black on gold, hard top, straight body, couple dents no bigger then a quarter and and there, but very clean. No motor or tranny, almost $200 in brakes alone! All rotors turned, repacked bearings, SS brake lines, new pads in the front. SOLD

TH350 transmission with shift 2 kit. Same tranny that was in Twilight Topics car before he swapped to the six speed. Comes with brand new change over kit from 700R4 SOLD

autometer carbon fiber electricial gauges, air\fuel, trans temp, water temp, oil pressure. All four for $150 or will seperate out for a little more.

Energy suspensions full polyurathane kit SOLD!!!!

Energy suspensions engine mount polyurathane kit SOLD!!!!

V6 springs $20

B&M megashifter for TH350 used and some wear on the cable, but still works with no issues. STILL AVAILABLE $50

Quasi-Traction · Posted: Tue Feb 06, 2007 10:17 am Post subject:

Damn.....I'd really love to buy that 355 off you. Sounds like a helluva buy.

Can't do anything like that until I get taxes back though.... Why me why me?

Xophertony · Posted: Tue Feb 06, 2007 1:46 pm Post subject:

how much for the air/fuel guage? and can you put up a picture or link to the product on summit or somthing?
is it this one? http://store.summitracing.com/partdetail.asp?autofilter=1&part=ATM%2D4775&N=700+115&autoview=sku
and does that include the "controller"? or would i need to buy somthing else besides that guage to make it work with a wideband?

also, about these bushing kits, what all is included? i am Definatly interested in the bushing kitts.

budgetracer · Member Joined: 05 Mar 2006 Posts: 40 Location: Salem

That is the correct gauge. I don't know if you need a "controller" I've never hooked it up. I've only taken it out of the box to check fitment for the gauge pods I built. I'll take $45 for it.

Here is the full bushing kit, I thought I had the bigger one but I guess not, it is missing the tie rod bushings. I'll take $80 for it.
http://store.summitracing.com/partdetail.asp?autofilter=1&part=ENS%2D3%2D18131R&N=700+400008+4294908153+4294865789+4294907958+115&autoview=sku

This is the motor\tranny bushing kit
http://store.summitracing.com/partdetail.asp?autofilter=1&part=ENS%2D3%2D1130R&N=700+400008+4294908153+4294907958+4294925044+115&autoview=sku

Xophertony · Posted: Tue Feb 06, 2007 3:04 pm Post subject:

you have PM

Xophertony · Posted: Sun Feb 11, 2007 2:02 am Post subject:

picked up my bushings today. thanks Smile

someone needs to buy this car. it looks damn nice. black on gold... real classic.

budgetracer · Member Joined: 05 Mar 2006 Posts: 40 Location: Salem

bump for new prices! Time for this stuff to go.

Quasi-Traction · Posted: Sat Mar 10, 2007 12:50 am Post subject:

how much you want for the Edlebrock 600?

Xophertony · Posted: Sat Mar 10, 2007 12:59 am Post subject:

man, if i had a dedicated garage i would buy your shell and swap over all the stuff from my 86 onto it. an 83 T/A with a MPFI 2.8 Laughing

too bad, it would so be worth 200$ to switch to a hard top in that car too. and i could deffinantly make that back in parts. Sad

anyone want to lend me a two car garage for a few weeks?

izcain · Posted: Sat Mar 10, 2007 10:14 am Post subject:

I would go buy it but Im to far away! bummer

NHRA427 · Posted: Sat Mar 10, 2007 10:22 am Post subject:

Package deal for th350 and shifter?

budgetracer · Member Joined: 05 Mar 2006 Posts: 40 Location: Salem

A guy stopped by to pick up the shell today, and waiting for NHRA to pick up the tranny and shifter.

I still got the gauges and the motor!

NHRA427 · Posted: Wed Mar 14, 2007 3:07 pm Post subject:

Saturday for the transmission?

budgetracer · Member Joined: 05 Mar 2006 Posts: 40 Location: Salem

Saturday is perfect, I have the day off, so we just have to schedule around the woman!