Cascade Crew

Xophertony · Posted: Sun Aug 20, 2006 11:16 pm Post subject:

those "pannals" you have sold, are those the lower kick pannals (the ones with the holes for the pedals) ? if NOT i need a black one for drivers side with a hole for a clutch pedal. i had to cut up the original and it does not fit right.

aaron_sK · Posted: Mon Aug 21, 2006 10:22 am Post subject:

Working all that weekend, so no Canadia trip for me. PM me with your PayPal info and I'll send you my address.

Magman · Posted: Mon Aug 21, 2006 5:27 pm Post subject:

Quasi-Traction,
Here's some pics of the relay. The one I'm holding is the actual relay I'm looking to replace (red car). It is located on the drivers side just aft of the Charcoal Canister. The pics of the relay on the blue car have it located back by all the other relays in the cowl/firewall area, it is the one furthest to the right as seen here. The relay has four wires, one red, one black, two brown. The relay itself is marked: BOSCH 12V 20/30A with the following numbers on it 25525638. As you can see, I'll need at least 10" of the wiring from the back of the relay. Thanks

Magman

[/img]

Quasi-Traction · Posted: Tue Aug 22, 2006 4:19 am Post subject:

I'll look today for that relay.

Aaron,

I don't use paypal at all, how exactly does it work?

Quasi-Traction · Posted: Tue Aug 22, 2006 4:21 am Post subject:

aaron_sK · Posted: Tue Aug 22, 2006 5:38 am Post subject:

Twilightoptics · Posted: Tue Aug 22, 2006 7:52 am Post subject:

Quasi-Traction · Posted: Wed Aug 23, 2006 12:59 pm Post subject:

IROC Magman...

I looked through the harness and I think I have it..(at least the one on the Red Car) the second picture was kind of blurry, so I don't know if its the same thing. How much length of wire did you need again?

Here it is:

Quasi-Traction · Posted: Wed Aug 23, 2006 1:19 pm Post subject:

Tony.......When I bring over Al's console lid tonight, I"ll bring all the lower dash pannels with me, I'll say $5. I have two, you can pick the best one.

If you're gonna get rid of the old one, give it to me, I'll put in the 85 since I have the brake petal from the Berlinetta in there now.

Quasi-Traction · Posted: Wed Aug 23, 2006 1:22 pm Post subject:

aaron,

how much would it cost you in fees if you sold something and recieved a payment of $5?

I just don't feel that good about doing paypal, that's all.

aaron_sK · Posted: Wed Aug 23, 2006 2:29 pm Post subject:

They charge like 30 cents plus 3% or something, so probably not more than 40c. If you don't use PayPal, I can pay cash if somebody's going to be driving up here for anything.

Magman · Posted: Wed Aug 23, 2006 5:33 pm Post subject:

Quasi-Traction,
I need at least 10" of the wires, not a big deal though, just get me as close to 10" as you can. I can remount it if necessary.

So, to re-cap;

1. Both under dash panels, Drivers side covers the wiring and pass side covers the cpu.
2. Relay with 10" of wire.

I'll have to PM you my address to ship, I simply can't make the Canada gathering. Thanks

Magman

Quasi-Traction · Posted: Thu Aug 24, 2006 6:30 pm Post subject:

45nut · Posted: Thu Aug 31, 2006 4:57 pm Post subject:

Are the hood support struts available? The ones in mine are too weak to hold mine up.

Xophertony · Posted: Thu Aug 31, 2006 5:15 pm Post subject:

so are quasitractions. (his hood damn near killed us yeterday). NAPA sells replacements for ~30 each

Quasi-Traction · Posted: Thu Aug 31, 2006 7:28 pm Post subject:

The only ones that hold are the ones on the Berlinetta, and I"m keepin those Thumbs up