Cascade Crew

Alphius · Last edited by Alphius on Fri Apr 26, 2013 6:00 pm; edited 3 times in total

Make offers! I need to get this stuff gone.

'02 Camaro pedal set. Has all switches. Picture1 $60

'02 Camaro steel driveshaft. In good shape, U-joints feel great. Picture1 Picture2 $20

Passenger window for thirdgen. Picture1 $20

Passenger window motor and regulator. I was told that this works, but have never tried it for myself. Picture1 $20

Stock T56 shifter with leather knob, knob is about an 8/10 on condition. Picture1 $20

1 thirdgen pressure side power steering hose, brand new never used. Great for fixing your leaky PS system. Picture1 $20

1 T-top overhead console, in pretty good shape. Map light has a small crack in the surround, the pocket elastic has been cut and the Camaro flashlight works but has broken retaining clips that hold it together. Picture1 $30

A perfect set of grid taillights. No pictures yet, but I just picked these up at the junkyard today. $80

ChrisB · Posted: Mon Feb 18, 2013 1:57 pm Post subject:

I will take the A Pillar trim with gauge pod and the Grant Steering wheel.

I rarely ever get up north, my company's main office is in Mill Creek but I don't get up there often. Do you ever get done south at all?

Alphius · Posted: Mon Feb 18, 2013 2:17 pm Post subject:

Sometimes I go down to the Chehalis or Westport areas to visit family, I could meet up with you at some point as I pass through Federal Way or something. I don't have any trips planned in the next couple weeks but I could give you a call or PM when I do go down.

ChrisB · Posted: Mon Feb 18, 2013 2:42 pm Post subject:

Sounds good, I will likewise let you know if I have to head up north for some reason. 480-433-8658 is my number. Thanks

charlie6178 · Posted: Wed Feb 20, 2013 2:52 pm Post subject:

take $75 shipped for the T56 crossmember???

Alphius · Posted: Wed Feb 20, 2013 3:20 pm Post subject:

$75 shipped is a little too low for me. Shipping eats into that pretty well.

If you can wait until dyno in April I can bring it down to the Portland area and leave it with someone for $75 total. Kind of like what we did with the Z28 wheel last year that I left with John Dewey for you.

charlie6178 · Posted: Wed Feb 20, 2013 3:41 pm Post subject:

that totally works for me. i don't plan on bolting the T56 in my car til mid summer at the soonest. i had planned on making a crossmember like last time, but if you'll let that one go for $75 i would just do that!

Alphius · Posted: Wed Feb 20, 2013 7:37 pm Post subject:

Sure, I can do that. If you want to PayPal me some money closer to dyno I'll bring it down and we can either meet up that weekend or I can leave it with someone for you to pick up later.

charlie6178 · Posted: Thu Feb 21, 2013 4:50 pm Post subject:

that sounds great! thanks!

83Z28BlackBetty · Posted: Sat Feb 23, 2013 3:13 pm Post subject:

Gabe, I'll take those tail lights from ya if you still have them in May when i come back and visit. One of mine was busted out by the car hauler when it was shipped back to Everett. If you get a local buyer before then no biggie.

Alphius · Posted: Sat Feb 23, 2013 7:16 pm Post subject:

Do you need a passenger side or driver's side?

I have one driver's side with a little chip and broken license plate light and one passenger's side that is perfect except for the license plate light. If you have a good license plate light and you need the passenger's we can work something out. I can take a picture of the chip on the driver's side one as well and post it up to see if you want that one. It's a really small chip, I ran them on my Z28 for a long time until I found a better set.

jchaussee · Member Joined: 14 Nov 2010 Posts: 1318 Location: renton

Any t tops?

Alphius · Posted: Sat Feb 23, 2013 10:42 pm Post subject:

Nope. I prefer hardtops. Razz

jchaussee · Member Joined: 14 Nov 2010 Posts: 1318 Location: renton

Right now I do too. Never had one fly off on the freeway. Scared the poo out of me. Are the jy in your area open Sunday

83Z28BlackBetty · Posted: Sun Feb 24, 2013 12:46 am Post subject:

charlie6178 · Posted: Sun Feb 24, 2013 8:50 am Post subject:

hey, how far are you from Sea-Tac??? i have a trade show this weekend we are exhibiting at next weekend at the double tree there.

Alphius · Posted: Sun Feb 24, 2013 2:42 pm Post subject:

Charlie, I'm at Exit 194 on I-5 if that helps you out at all. Next weekend? If you have some free time I could head towards Seattle and you could head my way and maybe we could meet somewhere in the middle?

Jake, here's some pictures of the taillights. Let me know if you want them, I can let them go for $20 for the pair to you and maybe a beer or two when you come up here later on. Wink

The chipped spot is nearly unnoticeable when they're on a car.

Excuse the dirtyness. They do clean up good. Thumbnails are clickable.
Right:

Left with the chip:

Closeup of chipped spot:

Right license light:

Left license light:

83Z28BlackBetty · Posted: Mon Feb 25, 2013 12:59 am Post subject:

Those would work perfect for me Gabe! I'll rock them for now and if i find a better set then I'll grab those then. But at least it gets me legal again. See ya in May for some brews and lights exchange Smile

Alphius · Posted: Mon Feb 25, 2013 11:22 am Post subject:

Sounds like a plan Jake.

I marked the taillights, T56 xmember and the steering wheel/A-pillar sold respectively to Jake, Charlie and ChrisB. I'll hook up with all you guys at some point and transfer stuff/monies. Very Happy

charlie6178 · Posted: Mon Feb 25, 2013 3:17 pm Post subject:

sweeeeeet!!!