Cascade Crew

Alphius · Posted: Sat Nov 03, 2012 3:37 pm Post subject: Cheap 350

Sold!

RSFreak · Posted: Sun Nov 04, 2012 9:50 pm Post subject:

Wish I had some spendable cash! Sucks about your engine though. You going LSx now?!

Alphius · Posted: Mon Nov 05, 2012 6:39 am Post subject:

Yep.

Lowball me on parts if you want anything. I want to sell ASAP.

1987_sportcoupe · Posted: Sat Nov 10, 2012 7:19 am Post subject:

I still need a tranny for my car. Out if the three which one is in the best condition? How much would you be looking for for it as well?

Twilightoptics · Posted: Sat Nov 10, 2012 9:03 am Post subject:

Wait, it spun a bearing but doesn't need machine work? How does that work?

Alphius · Posted: Sat Nov 10, 2012 9:06 am Post subject:

I haven't torn it down yet but it was just barely knocking and has water in the oil. I've fixed engines with a small knock with a set of new bearings before without taking the block to a machine shop.
Obviously it isn't the best idea but it is doable. I will take that statement out.

Also I found my issue. The intake bolts were all still torqued but the FelPro 1205 intake gasket was leaking into the valley on the front water jacket.

Alphius · Posted: Sat Nov 10, 2012 9:07 am Post subject:

1987_sportcoupe · Posted: Sat Nov 10, 2012 9:15 am Post subject:

Ill take em

Alphius · Posted: Sat Nov 10, 2012 9:18 am Post subject:

1987_sportcoupe · Posted: Sat Nov 10, 2012 9:22 am Post subject:

This weekend would work better since I'm off anyway we can get it pulled this weekend? If not I can try and make it out next weekend. And I need a bellhousing/fork

Alphius · Posted: Sat Nov 10, 2012 9:31 am Post subject:

You're in Tacoma, right? How about this:
I will get it all pulled next weekend as planned. I don't have time to work on it this weekend. I will then put all three in my car and deliver them to you in Tacoma next time I drive through the area. I head south that way quite often so it shouldn't be too long.

I can hook you up with a bellhousing/fork for an extra $20. You already have slave/master cylinders and a clutch and stuff?

1987_sportcoupe · Posted: Sat Nov 10, 2012 9:36 am Post subject:

Sounds good to me. Here's my number. 253-583-4895. Give me a call next time you head down here
Do you have an extra stock shift knob too?

Alphius · Posted: Wed Nov 14, 2012 10:35 am Post subject:

I do not have an extra shift knob, sorry.

Updated parts remaining and lowered some prices!
Also added my gear reduction GM OEM LT4 starter to the list for $120.

Alphius · Posted: Sat Nov 17, 2012 6:15 pm Post subject:

Updated remaining parts and lowered prices again.

RSFreak · Posted: Mon Nov 19, 2012 8:57 pm Post subject:

You gonna be around Saturday?

Alphius · Posted: Mon Nov 19, 2012 10:34 pm Post subject:

Yes sir I am.

Alphius · Posted: Tue Nov 20, 2012 5:06 pm Post subject:

Took some bearing caps off over the weekend and they are wiped pretty good, but the shells didn't spin.

Alphius · Posted: Wed Nov 21, 2012 4:03 pm Post subject:

My rock-bottom crewbie only price on the Spohn crossmember/tq. arm is $300. Anyone interested? It fits T5 or 700R4 cars and gets the torque arm mount off of the transmission!
$150+ off of new retail for a lightly used piece!

91RSVert · Posted: Wed Nov 21, 2012 7:56 pm Post subject:

The spohn tq arm is a really great piece, makes the rear end alot more predictible. Good price also!!

fiveoformula · Posted: Thu Nov 22, 2012 1:31 am Post subject: