Cascade Crew

Xophertony · Posted: Sun Apr 15, 2012 4:35 pm Post subject: 9 bolt rear end. 3.27:1

For sale is a 9Bolt rear end. I do not know what third-gen this is originally from, I bought it from a crewbie who is long gone now. This is a disc brake rear, but it does NOT come with any brakes. This was originaly a factory positraction rear end, however the positraction is intermittent at best, might just need new fluid, might be completely ruined, I have no idea. It does not make any squeals or hums while driving, and there is very little rust. A few years ago the case was sand blasted and painted.

75.00 obo

Xophertony · Posted: Mon Apr 23, 2012 5:32 pm Post subject:

Status of this rear end has changed. I pulled the diff cover today and there was a lot of friction material in the fluid. I pulled the main berring retainers, and I pulled the axles, I put everything back together, but only loosely. This thing will have to be retourqued everywhere.

I have removed all brake hardware as well.

I am going to throw this thing away in two weeks, make me an offer that includes taking it away before then and it's yours.

Twigger · New Member Joined: 02 Mar 2012 Posts: 17

Dang if you wern't so far away I would love to snag it from you, I have been looking for one.

Xophertony · Posted: Tue Apr 24, 2012 11:10 pm Post subject:

where are you?

Alphius · Posted: Wed Apr 25, 2012 8:02 am Post subject:

I would have taken that off your hands if you took it apart before dyno. Wink

Twigger · New Member Joined: 02 Mar 2012 Posts: 17

Im in Olympia Washington, so way the heck up there.

Xophertony · Posted: Wed Apr 25, 2012 10:32 am Post subject:

If I could get it as far north as castle rock would that sweeten the deal? My mother lives up there, and I will probably be heading up there in the next month or so.

Twigger · New Member Joined: 02 Mar 2012 Posts: 17

I cant guarentee that I will be able to make it down. But when you planning on heading up let me know and I will try and make it work. Why did you decide not to use it?

Xophertony · Posted: Thu Apr 26, 2012 9:47 am Post subject:

the positraction stopped working, and i got a good deal on a 10 bolt with a zexel torsion.

I will have to look at my schedule and get back to you.

Twigger · New Member Joined: 02 Mar 2012 Posts: 17

I have a pretty much brand new zexel as well but it is apparently too wide for what Im doing so Im trying to figure out a remedy for this situation of mine.

Quasi-Traction · Posted: Fri Apr 27, 2012 2:22 pm Post subject:

the Zexel you have, are you talking about the whole axle, housing and all, or just the actual carrier (thing inside the pumpkin that holds the ring-gear)?

Twigger · New Member Joined: 02 Mar 2012 Posts: 17

Its the full meal deal, all new bearings and seals I had the tubes welded and I painted the whole thing. Its in my car now I might just end up keeping it but I dont know yet.

Xophertony · Posted: Mon Jul 16, 2012 8:55 pm Post subject:

Free to good home. Please take this out of my garage.

Quasi-Traction · Posted: Sun Aug 19, 2012 8:22 pm Post subject:

Tony, if nobody's offered, I'll take it.

Havvek · New Member Joined: 24 Jul 2012 Posts: 6

I would love to take it off your hands, but im at JBLM ( Tacoma) up in WA.

Xophertony · Posted: Sun Aug 26, 2012 5:33 pm Post subject:

I still have it. Text me at 971-645-9359 to make arrangements for pickup.