Cascade Crew

Adamgbabcock · Posted: Wed Dec 15, 2010 4:44 pm Post subject: Need a few things:

For a 91 RS 305 5spd. I'm not made of money so hopefully this is all one (or more) man's junk Very Happy

. I am also open to bartering if anyone would prefer that. I know I can find a lot of this online but I figure if anyone local is in need of some cash and has extra parts we could both help eachother out. Thanks.

OEM:
-Straight hood (can be off z28, color doesn't matter as it's getting painted)
-Ash tray insert
-Dome light cover/diffuser thing

Aftermarket (if anyone has any of this laying around):
-Larger exhaust / louder muffler
-The conversion to get rid of these sealed headlights and HID's
-(Found)Custom fit sub box
-(Found)Something better than these crappy xplod speakers

I'll add more if I think of anything, thanks.

Al Hasse · Posted: Wed Dec 15, 2010 7:04 pm Post subject: Re: Need a few things:

Adamgbabcock · Posted: Wed Dec 15, 2010 9:48 pm Post subject:

Thanks, Al. He messaged me and I replied, was wondering some of the specs and being that you seem to have assembled it maybe you'd know. I haven't modified anything in the hatch area, will it just slip right in or am I going to have to remove panels. I currently have a 12w6 that I dropped to 2ohms so I'm assuming you've paralleled all four voice coils to get it down to 1ohm, correct? Do you know if it's close to factory spec and tune? I'm interested in making this happen in the next week-ish so any info would be greatly appreciated.

Thanks,
Adam

Al Hasse · Posted: Wed Dec 15, 2010 10:20 pm Post subject:

It will slip right in. It fits across the ledges in the well, the lower part of the well is unused, so it's a shallow box when out of the car.

The woofers are dual 6 ohm wired parallel, gets the load down to 1.5 ohm (closest I could get them to 1 ohm). It'll be too much for a 2 ohm amp to handle, but you'll only get about 75% of a 1 ohm amp's capability (you'll see 750 watts of a 1000 watt amp). It is a ported box and IIRC, it's tuned to about 34 Hz. They sounded really good with the Memphis Belle amp I currently use.

This is what it looked like in my 92...

Adamgbabcock · Posted: Mon Dec 20, 2010 11:52 pm Post subject:

No one has a parts car with an ash tray insert and a dome light cover thing?

IROC-stangs · Posted: Tue Dec 21, 2010 1:56 am Post subject:

May you be intrested in an 2.5 hushpower muffler? I'll let go of it for about $100.

Adamgbabcock · Posted: Tue Dec 21, 2010 1:13 pm Post subject:

After I paint and setup the sound system I'll likely be looking into exhaust. If you still have it then, I'll send you a message. Thanks =)

BluFbdy · Posted: Sun Jan 02, 2011 12:30 pm Post subject:

If you need a straight hood you can take mine once I buy the fiberglass one, I got it from a friend on tgo in az after some girl cut in front of me, ruined my stock one and my friend wasn't using it on his anymore, it was keyed but with a new paintjob it would be perfect

Adamgbabcock · Posted: Sun Jan 09, 2011 8:49 am Post subject:

How much do you want for it? And when do you plan on getting the fiberglass hood?

BluFbdy · Posted: Sun Jan 09, 2011 11:22 am Post subject:

I'm just waiting on james to pull it out of his shed but I'm leaving for az next week so probably around the 21st ish, 20 bucks sound good?

Adamgbabcock · Posted: Sun Jan 09, 2011 6:47 pm Post subject:

Sounds good to me. No dents or dings?

BluFbdy · Posted: Sun Jan 09, 2011 7:15 pm Post subject:

None, it was keyed by a pissed off vette owner, but you're going to take it down to bare metal anyway so you'll never notice that after you paint it

Adamgbabcock · Posted: Wed Jan 12, 2011 3:45 pm Post subject:

That's shitty, stupid Chevy owners... oh, wait =-\ I guess I own a Chevy now too lol

BluFbdy · Posted: Wed Jan 12, 2011 5:30 pm Post subject:

He was pissy cuz his c5 lost to a thirdgen lol we were cruising around tempe and he triied racing us but he didn't know that my buddy had an ls2 lol so he lost and keyed the hood when we went inside a restaurant, stupid kid lol in any case after my friend took the car down for more goodies he came across a different hood and handed this one off to me

DBL_TKE · Posted: Wed Jan 12, 2011 5:59 pm Post subject:

I've got a brand new, never installed Flowmaster 80 series muffler for sale.

Quasi-Traction · Posted: Mon Jan 17, 2011 9:34 pm Post subject:

I've got a White flat RS/sport coupe hood for sale, but some some crewbie (forgot his name) from Roseburg, OR has dibs.

At current, no way to transport, and UPS is the only one who will transport and that's EXPEEENSIVE.

aaron_sK · Posted: Mon Jan 17, 2011 10:20 pm Post subject:

If you guys want a hood and a muffler transported from Oregon I'm making the pilgrimage down to Mike's at some point to pick up some parts. I'd be willing to cut a sweet deal to haul any parts back up here to the Tacompton area.

Quasi-Traction · Posted: Mon Jan 17, 2011 10:24 pm Post subject:

Roseburg is about 200mi south of that dude, but I appreciate the offer.

aaron_sK · Posted: Mon Jan 17, 2011 10:26 pm Post subject:

I thought parts were coming up here to Bonney Lake? I must have missed something here. Ah well, carry on.

IROC-stangs · Posted: Mon Jan 17, 2011 10:40 pm Post subject: