Cascade Crew

batcave · Posted: Sat Jun 27, 2009 5:16 pm Post subject: check eng light

ran scan on my 1988 formula a code 34 comes up changed maf sensor problem is still there could i have a short in one of my wires going to my maf any good shops in vancouver to take this car

kurfbird · Posted: Sat Jun 27, 2009 7:18 pm Post subject: DId you reset the ECM

Did you reset the ecm and see if the code comes back. Discoenct the battery for 30 seconds

batcave · Posted: Sat Jun 27, 2009 8:57 pm Post subject:

disconected the battery code still comes up changed maf sensor same prob car had 2 wires that were soldered together years ago on maf car runs fine for the first 3 starts then the light turns on again

Twilightoptics · Posted: Sun Jun 28, 2009 8:45 am Post subject:

Verify the wires are good and soldered together in the right order.

Then replace the MAF power and burnoff relays.

batcave · Posted: Sun Jun 28, 2009 10:54 am Post subject:

the 2 burnoff relays are they the ones in the back by the fire wall

Twilightoptics · Posted: Sun Jun 28, 2009 12:12 pm Post subject:

One is the burn off, one is the maf power, one is fuel pump, sometimes there is a 4th one depending on year.

Fuel pump should be one with a green wire/white stripe.

batcave · Posted: Sun Jun 28, 2009 12:51 pm Post subject:

thanks for the help im trying to get this car out of the garage so i can finally drive it instead of letting it sit