Cascade Crew

PonchoTA · Posted: Sat Mar 06, 2004 8:38 am Post subject: Hey Schultzy, come on in!

Hey dood!

Do you still have the specs handy on that custoom UltraDyne cam you have/had?
I remember you and others talking about it, but I can't find the post!! Must have been on the old site and lost now!

I'm trying to see if I can improve on the cam I ran on the Desktop Dyno with the heads I'm putting on! Laughing

Later!
Paully
EW1(SW/AW) Ret. Very Happy

Schultzy89GTA · Posted: Sat Mar 06, 2004 8:52 am Post subject:

Hey Paul,
Not sure if you are thinking of the one that Dewey had for sale at one point or the one that I am currently running (both Ultradyne). I'll give the specs for both...

John -
Adv. Dur. .272/282
Dur@.050 .206/216
lift . . . . . ..447 .447
LSA . . . . . 112

Mine-
Adv. Dur. .284/292
Dur@.050 .230/238
lift . . . . . ..530/.530 (.565/.565 w1.6)
LSA . . . . . 114

HTH - Let me know if you need anything else bud.

-Schultzy

PonchoTA · Posted: Sat Mar 06, 2004 9:26 am Post subject:

Thanks Mike!

You don't happen to have the Lobe-Center Angles and Intake Centerlines, do ya? Very Happy

That's all I'll need (in addition to the info you have so kindly provided) to make these into Cam Profiles for the DD2K to handle!

I realize that most manufacturers do not provide these, so I'm not gonna fret if you don't have them, yet, I still hope!

Tks,
Paul

Schultzy89GTA · Posted: Sat Mar 06, 2004 9:43 am Post subject:

Here is all that I have bud...

UD 284/292 Cam Card

-Schultzy