Cascade Crew

Dewey316 · Last edited by Dewey316 on Mon Dec 12, 2005 9:33 am; edited 1 time in total

Pauly and I got some work done on the camaro this weekend.

Quick teaser pic ... (from my crappy cell-phone camara.)

And here is one of Hardcore, working on those pesky a-arms.

Sellmanb · Member Joined: 30 Nov 2004 Posts: 727 Location: Tigard, OR

sick wheels!

chevymad · Posted: Mon Dec 12, 2005 9:15 pm Post subject:

Umm.. whats with the 6ft of clearance above the tire?? Razz

Schultzy89GTA · Posted: Mon Dec 12, 2005 9:16 pm Post subject:

I wanna see the slam!

-Schultzy

iansane · Posted: Mon Dec 12, 2005 10:07 pm Post subject:

You doing those weight jacks finally?

Dewey316 · Posted: Mon Dec 12, 2005 11:06 pm Post subject:

Twilightoptics · Posted: Tue Dec 13, 2005 1:00 am Post subject:

iansane · Posted: Tue Dec 13, 2005 1:13 am Post subject:

Are you going to be setting the height near the same? What's the spring rate compared to your current setup?

Dewey316 · Posted: Tue Dec 13, 2005 7:07 am Post subject:

Right now it is down real low, seems to be doing fine there. Spring rates are 750# front 175# rear. I wouldn't mind a little stiffer, at some point I'm probably going to go to 800 or 825, and I want to put on the UE panhard brackets, if I do that, I'll probably be in the 300# rear range.

Dewey316 · Posted: Tue Dec 13, 2005 8:07 pm Post subject:

And here are better pics. (execpt its freakin dark when I leave for work, and dark when I get home, so the pictures were taken in the dark)

iansane · Posted: Tue Dec 13, 2005 8:21 pm Post subject:

Need some parking lot photos from a little bit farther back. Smile

Schultzy89GTA · Posted: Tue Dec 13, 2005 8:41 pm Post subject:

Wow!

I agree we need better pics but from what I can see... fricking sweet!

What a difference. Congrats Dewey... it looks good AND you completed a project Very Happy

-Schultzy

rjmcgee · The Hammer Joined: 08 Jan 2004 Posts: 2320

Looks sweet. Does it handle better?

Dewey316 · Posted: Tue Dec 13, 2005 8:46 pm Post subject:

Yeah, it does, not sure how much was the tires, and how much was the spring rates. I still have a few minor kinks to work out, like the rear-bump stops, and such. And I probably should get it aligned, once I find the final height setting.

CheezX · Member Joined: 16 Jan 2004 Posts: 90

Are the shocks holding it up in those pictures? I thought you said it was lower than mine. Very Happy

I gotta take a picture of my bumpstop for you. hehe

Dewey316 · Posted: Wed Dec 14, 2005 5:03 pm Post subject:

Those are bad angles to show it...

And I was going to chat with you about bump stops. I think I have a solution for the rears, but was going to see what you did in the front.