Cascade Crew

kidcamaro

just as the title says. what would i need? i know i would need a new ecm. would i need new injectors and stuff like that?

JohnnyIROC-Z · Posted: Fri Mar 11, 2005 9:55 pm Post subject:

What induction is your car? what Year?

Twilightoptics · Posted: Fri Mar 11, 2005 9:59 pm Post subject:

Excatly. We need to know everything about your car. What it has now, transmission, induction, etc.

kidcamaro · Posted: Fri Mar 11, 2005 11:51 pm Post subject:

305/tpi/700r4 91 z28 no mods cept for k&n and flowmaster.

Twilightoptics · Posted: Sat Mar 12, 2005 12:21 am Post subject:

Wolffy · Member Joined: 22 Jan 2004 Posts: 375 Location: Spokane

Paul dont 350's use 24lb injectors stock ?
or am i smoking something again
i may be totally wrong, but i thought they used 24

JohnnyIROC-Z · Posted: Sat Mar 12, 2005 12:10 pm Post subject:

You don't really need the computer though if you can find one might as well get it. all you really need is 22lb/hr injectors and the knock sensor. everything else is cake, And it's an easy swap. but you will need stay with the same year or newer 350, well actually 87 or newer because the difference in the head to intake manifold bolt style. So stick with an 87-92 350 and you're good to go.

Twilightoptics · Posted: Sat Mar 12, 2005 3:16 pm Post subject:

JohnnyIROC-Z · Posted: Sat Mar 12, 2005 8:28 pm Post subject:

Mine didn't run like crap, It just didn't run to full potential, So it's not NEEDED, if he can't find one and needs that engine in then he can run without it, hell he can even run the 19lb injectors as long as he gets an AFPR and bumps it up to about 60 psi, of course that will burn out the injectors and the pump faster but it can be done, I would RECOMMEND getting a 350 chip and 22lb/hr injectors but it's not absolutely impertive is all im saying

Twilightoptics · Posted: Sat Mar 12, 2005 8:34 pm Post subject:

JohnnyIROC-Z · Posted: Sat Mar 12, 2005 8:56 pm Post subject:

haha ya and DON'T do the homemade AFPR, doesn't work very well.