View previous topic :: View next topic |
Author |
Message |
chevymad Master B
Joined: 11 Jan 2004 Posts: 5473
1987 Pontiac Formula
|
Posted: Sat Oct 08, 2016 3:16 pm Post subject: Brake upgrade |
|
|
Picked up most of my brake upgrade parts today. Going LS1 brakes all 4 corners. Rears I got the backing plates, ebrakes, powerstop rotors, hoses, calipers and brackets. Power stop extreme pads if I want to use them.
Fronts look like stock type rotors, calipers and brackets, hoses and powerstop pads again.
Just ordered the brackets from BigBrake. I think I can get one of our brake lathes to work to turn the rotors into hubs. Looks like i'm on my way!
While waiting for Steven Solders to show up with the parts at a PIR park n ride.. 3 bikers pull in behind me.. Woman gets off her bike and starts screaming at a guy and shoving him around. Not sure what he did, but she was pissed. Didn't look like anybody was going to kill anyone, so I guess it was just entertainment. Dude's in deep shizzle though! She was still steaming and pacing when I left. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
QwkTrip 11sec Club
![](images/avatars/5331510654664d0c0e14ee.jpg)
Joined: 17 Feb 2004 Posts: 3942 Location: Peoria, IL
1989 Pontiac Firebird
|
Posted: Sat Oct 08, 2016 4:40 pm Post subject: |
|
|
Probably drove stupid and nearly killed them. Or she peed her pants because he wouldn't stop.
The brakes sound neat. We'll want pictures, you know! ![Cool](images/smiles/icon_cool.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chevymad Master B
Joined: 11 Jan 2004 Posts: 5473
1987 Pontiac Formula
|
Posted: Sat Oct 08, 2016 5:04 pm Post subject: |
|
|
Got some cleanup work before I'll take pics. Pics dude posted for the sale ad were from before he put them on his own 3d gen. A bit dirty now.
Been studying and ordering the miscelaneous stuff I'll need. Proportioning valve and springs that kind of thing. Looks like these rear rotors will fit over my drum axles. Had forgotten there were issues with that on some swaps. Frankly.. I don't even remember if these were drum axles or disc. I swapped to 28 spline axles when I did the Zexel install. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
QwkTrip 11sec Club
![](images/avatars/5331510654664d0c0e14ee.jpg)
Joined: 17 Feb 2004 Posts: 3942 Location: Peoria, IL
1989 Pontiac Firebird
|
Posted: Sat Oct 08, 2016 5:19 pm Post subject: |
|
|
chevymad wrote: | pics dude posted for the sale ad were from before he put them on his own 3d gen. A bit dirty now. |
May the fleas of a thousand camels infest his arm pits. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chevymad Master B
Joined: 11 Jan 2004 Posts: 5473
1987 Pontiac Formula
|
Posted: Sat Oct 08, 2016 5:56 pm Post subject: |
|
|
Well, I didn't pay his asking price either. It'll work out. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chevymad Master B
Joined: 11 Jan 2004 Posts: 5473
1987 Pontiac Formula
|
Posted: Tue Oct 25, 2016 8:35 pm Post subject: |
|
|
Bought a harbor freight blast cabinet and been cleaning up the parts. Tonight I disassembled, powder primed and powder coated 3 of the calipers. I didn't have enough silicone plugs to do all 4.
They did come out nice though.
![](https://i7ggyq-ch3302.files.1drv.com/y3mZ0BX-1LjvRaT8YVQmXVoqWYH-Y2Qu-e11qLMt5g6uIzyD-n0ZP2Q4LPn-FmtSrrABl7fFP599GasJ5mb2N_vN9XfBhZ6-qIpAWJO_9kLF6MPiZ5CdovIceO4P16OiIgV7ntGxjGJG9Xq8LqTHdIZ_8nhEU2bf0FYztfcApp82U4?width=660&height=371&cropmode=none) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
QwkTrip 11sec Club
![](images/avatars/5331510654664d0c0e14ee.jpg)
Joined: 17 Feb 2004 Posts: 3942 Location: Peoria, IL
1989 Pontiac Firebird
|
Posted: Wed Oct 26, 2016 4:37 am Post subject: |
|
|
PINK?!?!?
(are you color blind?) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chevymad Master B
Joined: 11 Jan 2004 Posts: 5473
1987 Pontiac Formula
|
Posted: Wed Oct 26, 2016 6:19 am Post subject: |
|
|
Not you too! lol Bright ass halogen lights 2ft away. They're very red as it says on the bottle. ![Laughing](images/smiles/icon_lol.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
izcain 9sec Club
Joined: 09 Sep 2006 Posts: 1306 Location: Port Angeles WA
1983 Chevrolet Camaro Z/28
|
Posted: Wed Oct 26, 2016 10:42 am Post subject: |
|
|
Lol
looks good! _________________
1983 Z28 383 + 201ci more = New Heart for this season!
9.17 @ 148 |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Alphius Peanut
![](images/avatars/17565934854c4f4e4ab6f09.gif)
Joined: 05 Sep 2006 Posts: 2429 Location: Grand Mound
1984 Chevrolet Camaro Z/28
|
Posted: Wed Oct 26, 2016 11:19 am Post subject: |
|
|
Just ask the Subaru STI guys, "cherry blossom red" (pink) is a very manly color. No need for shame. ![Laughing](images/smiles/icon_lol.gif) _________________ 84 Camaro Z28 - LS1/T56
85 Silverado - Low and Slow |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Wed Oct 26, 2016 6:41 pm Post subject: |
|
|
Nobody tell Jon this is the 21st century. It will be funnier that way. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chevymad Master B
Joined: 11 Jan 2004 Posts: 5473
1987 Pontiac Formula
|
Posted: Wed Oct 26, 2016 7:18 pm Post subject: |
|
|
Still look pink??
And as it says on the bottle. "Knockout Red" Sitting right next to my Super Mirror Red that I use on the jeep accessories.
And while these look pretty glossy, they just came out of the oven seconds before the pic and so the powder is still molten. The color should be "low gloss black" or chassis black.
![](https://llggyq-ch3302.files.1drv.com/y3mDn5HbOORQaiibnGAkLr5RXpBwKDyam4RpwbfHGEGbW3jC8KmnCjTgEyWby3n8Nd77V0DPK_X-3hdTpae4aNAiH1V0_RF4dtqjxX4D0HwMt1RoCuIN2JF-tog70XlDYwCIENPxqaLp97WLb8Od1RhhVDsN53NZAZFIPAmRfuJgL4?width=660&height=371&cropmode=none) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
QwkTrip 11sec Club
![](images/avatars/5331510654664d0c0e14ee.jpg)
Joined: 17 Feb 2004 Posts: 3942 Location: Peoria, IL
1989 Pontiac Firebird
|
Posted: Fri Oct 28, 2016 3:27 pm Post subject: |
|
|
chevymad wrote: | Still look pink?? |
Nope, still not red. My wife has informed me it is carnelian. Don't worry, I don't know what that is either, but it does sound luxurious.
Now you need to go get some Louis Vuitton brake lines to match. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chevymad Master B
Joined: 11 Jan 2004 Posts: 5473
1987 Pontiac Formula
|
Posted: Fri Oct 28, 2016 4:28 pm Post subject: |
|
|
Spoken by the guy with the gm orange car....
To be fair, your car does look alot more Red then most. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
QwkTrip 11sec Club
![](images/avatars/5331510654664d0c0e14ee.jpg)
Joined: 17 Feb 2004 Posts: 3942 Location: Peoria, IL
1989 Pontiac Firebird
|
Posted: Sat Oct 29, 2016 7:40 am Post subject: |
|
|
Now watch, some little old lady is going to scream at you in a panic to pull over because she thinks your brakes are on fire. I'm going to call that color "public disturbance red". ![Cool](images/smiles/icon_cool.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chevymad Master B
Joined: 11 Jan 2004 Posts: 5473
1987 Pontiac Formula
|
Posted: Sat Oct 29, 2016 6:52 pm Post subject: |
|
|
I once had an old lady customer that drove her car with the front wheel seized until she ground the bottom of the wheel off..... Someone actually had to flag her down off the street to get her to stop.
Anyway, today I got the rotors off the car and cut the rotor surface off. Then took them into work to use the brake lathe. By turning the tooling upside down I was able to make the drum tool cut the outside of the hub instead of the inside of a drum. So got my hubs all set now.
![](http://i293.photobucket.com/albums/mm75/chevymad/Mobile%20Uploads/20161029_133211_zpsht1j3nhm.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
QwkTrip 11sec Club
![](images/avatars/5331510654664d0c0e14ee.jpg)
Joined: 17 Feb 2004 Posts: 3942 Location: Peoria, IL
1989 Pontiac Firebird
|
Posted: Sat Oct 29, 2016 7:20 pm Post subject: |
|
|
chevymad wrote: | I once had an old lady customer that drove her car with the front wheel seized until she ground the bottom of the wheel off |
Oh my gosh, that is hilarious.
I once watched an old lady in a huge '80's sedan pull into a handicap parking spot and slowly creep forward until she ran into the sign post, then continue to slowly run over the post bending it down about 45 degrees, and then threw it in park and left the car on the sign. Didn't seem to concern her one bit. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
QwkTrip 11sec Club
![](images/avatars/5331510654664d0c0e14ee.jpg)
Joined: 17 Feb 2004 Posts: 3942 Location: Peoria, IL
1989 Pontiac Firebird
|
Posted: Sat Oct 29, 2016 7:30 pm Post subject: |
|
|
Okay, I was just telling my wife your old lady story and she laughed and said she drove on the freeway 45 miles on a flat tire.
I'm like, WHAT????
She keeps laughing about it saying people were trying to flag her down the whole way and she ignored them.
I'm like, WHAAAAAAAT????? WHEN WAS THIS?!?
Now she stopped talking.
Par for the course though. Just the other day I came home and her front license plate was mangled. I bent the plate back and tore off the broken frame and went inside without asking because I know I'm never going to get a straight answer. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chevymad Master B
Joined: 11 Jan 2004 Posts: 5473
1987 Pontiac Formula
|
Posted: Sun Oct 30, 2016 3:15 pm Post subject: |
|
|
Some things it's best not to know.
Got quite a bit done on the drivers side today.
Here's a pic of what little bit my old pads were still touching the rotors.
Starting to saw the old bits off the knuckle. Should have sawed a bit more off the steering stop though.
Knuckle cut down, dust shield cut down, bracket mounted and the whole thing put back on the car.
Turned down hub with new bearings installed, new longer studs, and then installed on knuckle.
Rotor and caliper bracket on. This is where I stopped. Need to disassemble again and clearance the head of the lower bracket bolt. It's hitting a bit of the old steering stop. I just didn't feel like going backwards at this point today!
![](https://iljq3w-ch3302.files.1drv.com/y3mF4ftboFYz9kteZoP5tkhNoR1L3hGUqtlBT2PsMoPJMHKBeTJm2qoHbQsRTsENyEKu4IBLSDDzhwHHvSk8JWzlfjpGmdVwfofUkHvAqPFjcZr2EKqtf838OrQfW-OAcutKpfJXF21xkQf82yN1TXdwig1sPbVJhT6rBah6Tng7Sc?width=660&height=371&cropmode=none) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chevymad Master B
Joined: 11 Jan 2004 Posts: 5473
1987 Pontiac Formula
|
Posted: Tue Nov 01, 2016 6:05 pm Post subject: |
|
|
Got the knuckle ground down and the brackets all bolted together. Went to install the pads and caliper, but found one of the pads is worn just slightly beveled in the long direction. I was allready hesitant to re-use them, but since they were aftermarket and looked in good shape I was going to try. Now I'm not so thrilled with that idea. Time for a new set of performance pads. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|