Cascade Crew

BluFbdy · Posted: Tue Sep 04, 2012 6:19 pm Post subject:

Ah I know how that goes lol hopefully you can resist the itch to start gutting better than I did lol

Alphius · Posted: Wed Sep 12, 2012 6:15 am Post subject:

Could I maybe buy the spare driver's side door from you? My new project might be needing a door.

Does it have good hinge pins? Any rust internally? You said they sat outside. And they are straight too, right? No dents?

Let me know.

Hielor · Posted: Wed Sep 12, 2012 7:59 am Post subject:

Hinges are good as far as I can tell without having mounted the door. No dents. The ground effects on the driver side have a crack from an incident moving the door.

Straight as far as i know.

As for internal rust... I haven't had the door card off of the driver side, but the passenger side had a lot of surface rust on the metal surfaces between the door card and the plastic layer. As far as i could tell there was no rust on the far side of the plastic layer, and a couple hours of scrubbing got rid of pretty much all of the rust that was visible.

I imagine the driver side will be similar to that.

Hielor · Posted: Sun Sep 16, 2012 4:06 pm Post subject:

Asking price lowered again. I think at this point I kind of want it gone more than I really care about getting money out of it.

Alphius · Posted: Sun Sep 16, 2012 4:07 pm Post subject:

I don't need the door anymore. I decided to sell the red IROC but thanks anyway. Smile

Hielor · Posted: Sun Sep 16, 2012 4:39 pm Post subject:

Hielor · Posted: Wed Sep 26, 2012 2:10 pm Post subject:

Asking price lowered on everything. The desire to get this stuff out of my apartment/garage is getting strong...

91RSVert · Posted: Fri Sep 28, 2012 4:03 am Post subject:

If your willing to ship that front swaybar, I might be interested.

Hielor · Posted: Fri Sep 28, 2012 10:07 am Post subject:

Sure, if you want to pay for shipping. No idea what the shipping would cost for it.

91RSVert · Posted: Fri Sep 28, 2012 1:50 pm Post subject:

Could you check for me. Home 72120, or business 72116

Dan Johnson · Posted: Sun Sep 30, 2012 7:56 am Post subject: 91

I'm very intrested in the whole car, what are you asking for it now? Thanks Dan

Hielor · Posted: Sun Sep 30, 2012 12:34 pm Post subject:

Asking price is currently $1900 for crewbies. Not totally firm on that but I really don't want to go too much lower, considering that's already less than a third of what I have into it.

Hielor · Posted: Mon Oct 08, 2012 1:22 pm Post subject:

Cleaned the car out today and discovered what I was afraid of--the rust on the driver side floor pan does go through in a couple of small places, all smaller than dime size. As far as I can tell, the rest of the floor pan is still solid and not in danger of falling out any time soon...

Price lowered to $1700 for crewbies as a result of this discovery...

minijensen · Posted: Mon Oct 08, 2012 8:25 pm Post subject:

do you still have the doors?

Hielor · Posted: Mon Oct 08, 2012 8:54 pm Post subject:

BluFbdy · Posted: Tue Oct 09, 2012 8:51 pm Post subject:

How's the itch to gut it comin? Lol

Hielor · Posted: Mon Oct 15, 2012 10:35 am Post subject:

Camaro is sold.

Hielor · Posted: Tue Nov 27, 2012 4:59 pm Post subject:

Remaining items are free; guy who bought the Camaro never got back to me, and I want this stuff out of my garage.

I don't have a vehicle capable of moving the larger items, so I'd prefer if people came to pick up--that's the cost of them being free Smile

If stuff isn't gone in a month or so, I'll probably just rent a U-Haul to take it to the junk.

jchaussee · Member Joined: 14 Nov 2010 Posts: 1318 Location: renton

I'll grab seats, maybe doors

Alphius · Posted: Tue Nov 27, 2012 5:12 pm Post subject:

If jchaussee backs out I will come pick up the seats. I need good power bases.