Cascade Crew

I'll be resorting to Galvanized Sockets , since the most stubborn bolt broke a socket bit* Laughing

bits & Pieces!...K-Mart Sucks*

I saw this and... Rolling Eyes

There was one guy who mastered pulling The Chevy Engines apart, but he moved out of our area!...The guy pulled my water pump out in like 20 minutes, I don't know where he moved to!

Braille it with a socket on an extension.

Or pull both nuts marked 3 and pull the whole pump away from the engine.

Tried that too...Nothing* Confused

I just tried to remove the #6 bolt, but its a no go, it's in a tight spot, between the metal hose and motor mount*...my hand and fore arm are too big to allow me to get there, the only real way to re ...

Which two bolts??? Confused

I most likely will use a cut off wheel, but right now I am having a devil of a time trying to remove the power steering mount to gain access the very last bolt that is trapped behind the power steerin ...

I tried the Irwin bits, they failed* Confused

...next step>>> Dremel The Bolt Head into a square and remove it*

Okay, got it figured out, gotta get a Irwin Bit removal set, but now the lovely rain has halted me until another dry day*

Does anyone know what to use to remove a stripped Torx screw I really need to remove a water pump to replace the seal???...I to remove it and need to get this done before Monday!!!

Thanx in advance ...

I replaced the bad O2 sensor, but it is under warranty, so it will go back to the shop and if the fuel rail or injectors are bad, I might just have them replaced???...I'll just have to wait and see wh ...

The shop fixed a code 45, and replaced the fuel rails and some vacuum hoses, and changed out the oil since the gas got in to it, it was having a high idle while parked and a crappy idle when in gear a ...

I took my car into the shop for fuel rail replacement/repair...but after a few weeks I am getting high idles at start up after sitting all night and smelling fuel on the oil dip stick, is it possible ...

This happens....

http://media.zenfs.com/en/blogs/motoramic/kingzl1dubs.jpg

http://autos.yahoo.com/blogs/motoramic/florida-most-blinged-camaro-zl1-brings-haters-force-171508028.html

Damn!... ...

I have cut this line 2 time already and I think I am over doing it too much , so I try one more cut and flare and if that does not do it, then it's time to get a whole new line!

It was done a long time ago, I ran out of time and had to get "Pete the Pirate" to rebuild it up and install it! ...Much thanks for that! Wink

Now I am just chasing this crazy brake jo ...

I am in the middle of doing brake work on my 91' Pontiac FB, and I am trying to see if any shop sells ready made pre-conformed brake lines or can recommend a good after market brand for a quick instal ...

Why does he suspect it to be a bad engine? Did the seller tell him something?

The car was bought 3rd hand, from someone who had it for a short while and decided not to pursue finishing it, as best ...

I have a friend who recently got a 88' formula project car with no distributor and no ECM and he is trying to see if the engine is blown or needs to be replaced?....I myself am not too familiar with t ...

Well whne it rains , it pours, I was doing a full inspection on the car and the right break line POPPED! Shocked

....But its alright We already had the new line in the trunk , just gotta til my break ...