Cascade Crew

The biggest problem with a car that sits for a long period is the injectors get clogged and your fuel turns to crap.

First, DRAIN THE TANK. And then put fresh gas in. Then be prepared to take t ...

yeah there was oil pressure. and no i didnt do that with the ecm. i didnt know bout that. il ltry it again tomorrow. my friend came over and said it sounds like a lifter. are those hard to replace? th ...

In Kamloops, snow and ice is common. We have a fair amount right now and all the roads are covered in snow and ice. A good set of ice radials are the best.

Almost forgot, I've never seen anyone discuss this before, but most guys with lift in the area you are using tend to use full roller rockers. I seldom see people with that amount of lift use "pivot b ...

I have never seen that on an "unabused" engine before. I say that, because how it "died" would not be abuse in my opinion. And "pivot ball" technology is usually pretty foolproof (excluding under/ov ...

Pity, if it had been a "piggy-back" I would have considered buying it. I would have just turned it into an "adapter" - I can always use those.

Is this memcal the "piggy-back" adapter type where you plug your old Memcal into it, and the EST circuitry flows through? Or is this a complete memcal and specific solely to the 85 MAF system. I.E. ...

I've got an '85 TPI Hypertech chip you can have for $20!

It's the one that works with a 160deg t-stat.

While most people are well aware of my opinion of "off-the-shelf" eproms from TGO. One thi ...

Welcome. I too am an old time TGO member who also finally came over to the "local club". I am trying to bring a few more guys over.

Romulator? You mean Ostrich. Or AutoProm. Don't you?!

=)

www.moates.net

Welcome, Glenn.

Mark

Thanks Mangus.

I actually use a Romulator, TunerCat and Diacom. I bought these before th ...

Was this an automatic that you aren't taking into account the torque multiplication? HSR does not make more torque on a 350, than an l98.

Both were stick vehicles and all are based on the sam ...

Ok, but with all those new parts, there really won't be much of a gain without chip tuning will there?

If I can plan this around a trip of Glenns down here then it might be doable if it can ha ...

Well thanks Shultzy. The GTA is black. It's a great "20 foot car". It's a great war horse that served me well in the "good times & bad times" since the day I bought it off the showroom floor back i ...

Kamloops is in the Interior of BC. You drive from Vancover BC to Hope BC, and then up either the Coquihalla Hwy (shortest route, but its a toll hwy and can get snow this time of year....best to take ...

I have a set of 225x15x60 Radial Snow Tires (Cooper WinterMaster) mounted on a set of 2nd Gen T/A 15x7 wheels. The wheels are grey in color and have all the beauty rims and center caps.

I only use ...

Uhh, I tend to pass on the "Mastercrap" stuff. They have some cheap deals for some things, and if it's for the "beater car' , I don't care. But for good performance, I prefer Lordco...but they still ...

I think this guy must be thinking of aluminum or V6 heads. I always thought that iron heads were about 100lbs in total (50 each) and aluminum was just little over half. Heck, the head companies alwa ...

Well thanks guys. A few do know me, but lots probably don't. I have been missing from TGO for the last little while due to health reasons. I prefer not to go into that at this time...that is my own ...

Hi Guys:

Some of you may recognize me from TGO as one of the moderators of the DIY Prom Board. In my quest to find "good prices" on parts (Canada sux when it comes to buying good parts), I've come ...

I have also had some success in tweaking the eprom to make an engine pass emissions. You need to know exactly where you failed and what the other readings are, as when you tweak on area (example you ...