Cascade Crew

My car: 1988 TPI 5spd camaro

My fuel pump doesn't prime, and my fuel pump relay just buzzes(rapidly turning on and off). It can build enough pressure to start and die immediately. What I have done: ...

Are you sure you are reading the correct pins? if you are measuring between the voltage source and signal instead of ground and signal you will get what you describe.

I have a version of this. They are all the same shot glasses, with white/black marking on them denoting the piece. Found it at a garage sale for cheap and couldn't pass it up. Very Happy

I am interested in the throttle body, if not the whole motor. Are you willing to sell just the throttle body and for how much?

Good to hear it was useful. Looks like you guys are making some good progress Very Happy

I have removed the cable and it only jambs under engine vacuum. First thing I tried was spray tons of lube in there, and over all the pivot points, worked it around for a while, then toweled off the e ...

Pretty sure, works great when the car isn't running. For some reason when running it jams. With it off the car there is a noticeable 1/8 inch of play in the shaft. With a quick throttle blip it return ...

So I finished doing a bunch of little things to my camaro. One of which was cleaning the throttle body and IAC. It was sticky at/near an idle which made it difficult to drive around.

After cleanin ...

Found them, the light green wire comes from the "convenience center" and is shorted to the tan wire with the key in the ignition. the tan wire then goes to the door jab switch and is grounde ...

Using my 88 shop manual, which is not very good at looking up wire colors. I'm not positive where you are looking but it lists the headlight dimmer switch outputs as light green and tan. Green will be ...

I am going to vote valve cover as well. It doesn't take much of a leak if its falling straight onto the exhaust manifold to make a really bad oil burning smell.

Ticking probably is a lifter, but h ...

Next scheduled meet is in Kirkland - Aug 21.
Let me know as well, I would really like to meet everybody and my camaro should be up and running by then.

well that was easy, I'm convinced. I will put the flowmaster on.

~Thank you

both systems have the same size pipes 2.75", 3" I'm not sure? both systems are completely welded though. so another question. will I need to drop my axle to put it in, or will it come down f ...

I bought a full exhaust system off of Schultzy, I really needed the headers and y pipe. It came with a flowmaster 80 series cat back which was a nice bonus. After thinking about it I'm not sure I want ...

Thanks for the exhaust Very Happy

now we get to see how long it takes me to get it put in.. Shocked

I plan on heading down this weekend for the exhaust. I should have room for more if anybody wants.

I might be interested in the whole exhaust system, or at least the headers and y pipe. Is the cat back a 3 inch system?

If the floor mats are still there when I get the mirror, I will take them. (the rubber Chevy ones pictured right?) I may also be willing to do some delivery of parts for people in Seattle/Whidbey area ...