Schultzy89GTA -> Polyurethane sway bar and end link bushings front and back. The sway bar bushings are greasable.
82camaro383 -> I installed a MSD 6AL ignition box with a Blaster 2 coil.
turbo_jimi -> Replaced the giant overflow tank with a cool catch can!
Schultzy89GTA -> JEGS #555-23501
turbo_jimi -> Black non-adjustable panhard rod.
turbo_jimi -> They will look cool once they're installed!
turbo_jimi -> Still need to install.
Richster -> 8.5 Plug Wires
Kage87Z -> Thought I'd ordered the kit. Wrong. I had to dig up the microswitch, wiring, brakeline and brass fittings. Instructions from a Hot Rod Mag install were very helpful.
Richster -> Pro Shifter, Short Throw
IROCDave -> Swapped out a 1st gen set of Trick Flow heads for the AFR's along with the cam.
fiveoformula -> Self aligning rollers with poly locks.
Kage87Z -> The stock seat sucked. installed it, finished striping out the rest of the interior.